1. You can choose to install it on the top right side of the trunk, under the co-driver's seat and other dry places that are not easily damp.
2. Remove the three wedges under the disc box before installation (for transportation protection), otherwise the eject operation cannot be performed when the power is turned on.
3. Determine the installation position and angle, and adjust the position of the shockproof spring. (For example, when placed horizontally, set the angle adjustment springs on both sides of the disc box to the "H" position) The shock-proof spring should be covered with a cover label to prevent dust or dust from entering the disc box.
4. The shell of the disc box cannot be short-circuited with the iron shell of the car, otherwise it will produce interference noise, so it is necessary to insulate it, put an insulating gasket on the bottom of the bracket, put a rubber pad on the fixing screw, and fix the disc box.
5. After the installation is completed, the disc box needs to be debugged. The host can control the upper and lower discs of the disc box, and the selection of upper and lower songs.
6. The company's models are only limited to match Sanyo series disc box machines.