How to restore the video accidentally deleted by the driving recorder? At present, the driving recorder is one of the necessary hardware of the vehicle, which can play an important role in the detection of traffic accidents and vehicle violations. However, most of the driving recorders rely on an external memory card to expand the capacity, and the memory card capacity There is a limit, so after the recording is full, it will automatically repeat the loop, which will cause the new video to overwrite the old video. Then, can we recover the video that was deleted by mistake?

After the data in the dash cam is deleted, there is a chance to recover, but the video should be stopped immediately after it is lost, because it is difficult to recover the covered video, and stopping the use will reduce the occurrence of coverage. Then you can try the following Two recovery methods.

Method 1: Disk detection

First connect the memory card to the computer, then right-click and select "Properties" to enter, and then click "Tools"-"Check" in the window in turn, and check both the following two options in the disk error check window that pops up. Click start

Method 2: Data Recovery Tool

If the video you need cannot be detected by the above method, you can also scan it with a professional data recovery tool. You can open "Hi Format Data Recovery Master" on your computer and select the "U Disk/SD Card Data Recovery" mode, if it is a recycle bin , Disks, etc. need to be restored, just select the corresponding mode.

After entering, you need to select the original data storage location. We can directly select the memory card that needs to be restored and then scan it. After completion, we can filter the content according to the file type. Because we want to restore the video of the dash cam, we directly check the "Video" You can view it, and finally check the required video and save it in a safe place. If you don’t find the video you need, you can also try the deep scan mode.

The above is the dash cam video recovery method that I want to share with you today. If you also encounter similar data loss problems, you can also use the hi format to scan and try it. Of course, no matter what the data is, remember to operate blindly to avoid data overwriting. , It’s really difficult to operate again.